Designed for demanding, medium duty applications

When you require extra strength and support from your belt look no further than Flat-Flex® XT®. Flat-Flex® XT’s unique smaller spaces increase the amount of joints across the width of the belt making the belt stronger. Flat-Flex® XT’s unique design enables superior distribution of product weight across the width of the belt, reducing metal fatigue and increasing belt life.

Flat-Flex<sup>®</sup> XT<sup>®</sup>

  • Transport
  • Cooking
  • Heating
  • Drying
  • Cooling
  • Drainage
  • Freezing
  • Enrobing
  • Frying
  • Baking
  • Dough Rolling
  • Battering
  • Breading
  • Dewatering
  • Shrink Wrapping
  • Forming
  • Elevating
  • De-Elevating

Flat-Flex® XT® Advantages:

  • Over 2X the life of standard belts
  • More joints across the belt for longer belt life
  • Up to 90% belt strength increase over standard Flat-Flex® belts
  • Clean-in-place, wash down design
  • Up to 78% open area for maximum air/liquid flow through
  • Smooth carrying surface lessens product damage
  • Available with C-Cure-Edge® loops
  • Easily joined using Flat-Flex® XT® joining clips or EZSplice® joining strands
  • USDA Accepted

Flat-Flex® XT® conveyor belt is available in the following belt meshes:

  • 7.26 X 1.60 mm
  • 12.7 x 1.83 mm
  • 9.60 x 1.83 mm
  • 9.60 x 2.08 mm

Edge Loop Types Available:

C-Cure-Edge® Single Loop Edge (SLE)

Flat-Flex® XT® Quick Reference Chart

XT Code Reference Pitch and Wire Diameter Nominal opening between wires Edge Loop Size XT Space Width Minimum Large Space Width Average Belt Weight (Kgs/m²) Maximum Tension per Joint – Kgf (N) Minimum Transfer Outside Diameter (grooved) Typical Open Area (%)
X426 7.26 x 1.6 5.66 7 22.23 50.8 2.9 6.8 (66.7) 19 71
X247 12.7 x 1.83 10.87 7 22.23 44.45 2.7 8.2 (80) 25 78
X327 9.6 x 1.83 7.77 8 22.23 57.15 3.1 8.2 (80) 25 74
X328 9.6 x 2.08 7.52 8 25.4 82.55 3.75 10 (98) 25 72
Width Tolerance(max. width 4267mm);0 to 150 belt width: +/-0.8
150 to 900 belt width: +/-1.9
900 to 1500 belt width: +/-2.4
over 1500 belt width: +/-3.2

All dimensions are in millimetres (mm) and are subject to Wire Belt Company manufacturing tolerances

If you have an enquiry for an existing application click here

If you have an enquiry for a new application click here

Component and Support Requirements for Flat-Flex® XT® Belts

COMPONENT QUANTITY CHART (SPROCKETS / BLANKS / SUPPORT STRIPS)
Number of XT spaces across belt Drive shaft Idler shaft Belt supports
Number of Sprockets Number of Wear Strips
Sprockets Blanks
3 3 2 1 2
4 4 2 2 3
5 5 2 3 4
6 6 2 4 5
7 7 2 5 6
8 8 2 6 7
9 9 2 7 8
10 10 2 8 9
11 11 2 9 10
12 12 2 10 11
13 13 2 11 12
14 14 2 12 13
15 15 2 13 14
16 16 2 14 15
17 17 2 15 16
18 18 2 16 17
19 19 2 17 18
20 20 2 18 19
21 21 2 19 20
22 22 2 20 21
23 23 2 21 22
24 24 2 22 23
25 25 2 23 24
26 26 2 24 25
27 27 2 25 26

Additional sprockets may be required on idler shafts exceeding 1200mm

PDF
Flat-Flex® XT® product brochure
Flat-Flex XT Clip Joining Instructions
Flat-Flex XT Drive component setup
Flat-Flex XT Existing Belt Enquiry
Flat-Flex XT New Application Belt Enquiry
Flat-Flex XT Sprocket Placement

Request More Information

  • Hidden